Dan's
RV7a Builder Website
Interior
| Date | Session Hours | Task |
| 8/29/2005 | 1 | secure interior bulkhead & forward panels in prep for transporting to FL |
| 8/28/2005 | 2 | cut & install carpet in fwd cabin & baggage area, thread & attach flap panel & supports |
| 7/17/2005 | 2 | install nutplates to forward cabin supports & drill panel & iron heat seal |
| 6/28/2005 | 1 | locate & scorch holes into side flap panel housing |
| 6/26/2005 | 3.5 | build forward interior panels & arm rests |
| 6/23/2005 | 1 | adjust new seats, check for rudder settings, secure lower panels using foam inserts |
| 6/18/2005 | 1.5 | apply neoprene soundproof sheets to interior panel & attach to interior cabin skin |
| 1/29/2005 | 0.5 | attach rear interior panel with 3m foam adhesive |
| 9/23/2004 | 1 | prep cement lower forward panel, prep & attach cushion foam arm rest |
| 9/21/2004 | 3 | size & cut lower panel & upper rear triangle panel, apply material |
| 9/16/2004 | 1 | cut carpet for baggage area & front cabin |
| 9/4/2004 | 3 | prime, paint interior panels. Apply adhesive to interior panels |
| 9/3/2004 | 2 | cut alum sheet panels, clean edges, sand & cut interior cloth for fabrication |
| 8/26/2004 | 1 | created templates for interior |